If you are a cyclist, then you have seen that many of the cyclists go to the gas station to put air in their tires instead, so as a beginner, you must have this doubt in your mind about how to put air in bike tires at gas station.
Whole my life, I went to a gas station to put air in my bike as it was near to me. So let me tell you that it’s not that hard if you know the right trick to do it. Just remember it’s important to know how to do it otherwise, you are going to end up with a flat tire.
So let’s get started with our guide on how to put air in bike tires at gas station, but before that, let us know that where you can put air in your bike at any gas station or not.
Can You Put Air in Bike Tires at Gas Station
The simple answer to this query is a big “YES.” You can fill the air in your bike at any gas station. But it is risky because the air compressors at the gas stations are regulated the same way as the gas pumps. They are meant to fill the big tires, so their air filling speed is much more.
We don’t know how much they will fill in one go, so always check that proper types of equipment are available or not at the gas stations for properly inflate air in bike tires.
But many of the times, we found ourselves in the situation where we have to go to a gas station to fill up our bike tire, so it’s totally fine in those cases. You need to know how to fill up your tire and know the amount of air your wire can withstand.
So now let’s move to the main section of our article, and that is how to put air in bike tires at gas station. Let’s find out how to do it easily.
How to Put Air In Bike Tires At Gas Station
So finally we came to the main top of our article that how to put air in bike tires at gas station. It is important that you inflate your tires with the proper pressure if you don’t want to end up with a flat tire. So it would be best if you used the proper equipment at the gas station to check the pressure and not end up underinflating or overinflating your bike tires.
Steps to inflate air in bike tires at gas station:
Step 1. The first thing you need to check is whether there is a proper pump device that can fit in your bike value. Usually, there are 2 types of valves used in bikes nowadays, i.e., Presta and Schrader, so check which pump device is available at the gas station.
Step 2. After confirming the valve, make sure the valve is near to the ground so that you can easily fill your bike tires with air.
Step 3. If you are on Schrader, you need to first remove the plastic cover from the top of the value to fill it up. As for Presta valves, firstly, you need to remove the cap over the valve, following with twisting the nozzle clockwise to open it.
Step 4. Now you need to mount the pressure gauge in the valve in both cases and start filling air into the bike tire. Also, make sure that you know the right amount of PSI (Pound-force per square inch) for your bike tires otherwise, you might end up with a flat tire.
Step 5. If you don’t know the exact PSI of your bike tires, then in any of the cases, pressure should not exceed 50 PSI. You can manually check your tire pressure by bouncing your bike and pressing the tire with your hand.
Note: If your recommanded PSI for the tire is 45 then you can fill it for upto 50 PSI without any damage so you dont need to be fear is you fill it out more than the recommanded value. But always try not to overinflating it.
Step 6. Once you fill it with the required amount of pressure, you find to put back the plastic cap on your bike just the way you remove it.
Piece of Advice
If you are still curious about how to put air in bike tires at gas station, I would suggest that you should go and try it once. It’s fun to explore new things!
If you have any other curiosity to know about, do not hesitate to contact me, or you can also check more such guides on our blog Bike Bicycle.